Units and Measures — Topic Guide

This topic guide helps you explore the subject in greater depth, review the key concepts, and better prepare for the quiz.

Units and measurements form the universal language of science and quantification. They provide standards for measuring physical quantities such as length, mass, time, temperature and electric current. The International System of Units, commonly known as the SI, now serves as the global reference system to ensure consistency, accuracy and comparability in science, industry, commerce and everyday life.

Advertisement

Why Do We Measure?

  • Measuring means comparing an unknown quantity with a unit chosen as a reference.

  • Saying that a table is two metres long means that its length is twice the unit called the metre.

  • A measurement must always include a numerical value and a unit.

  • The number 25, used by itself, does not indicate whether it refers to metres, seconds, kilograms or degrees.

  • Measurements make it possible to describe phenomena, reproduce experiments, manufacture compatible objects and trade products fairly.

  • Without common units, it would be difficult to construct a building, prepare medication, forecast the weather or compare scientific results.

Ancient Units

  • The earliest units of length were often based on the human body.

  • The cubit corresponded approximately to the distance between the elbow and the tip of the middle finger.

  • The foot, inch, palm and span were also used as references in several civilizations.

  • These units varied, however, according to region, period and sometimes the ruler in power.

  • A pound or a foot therefore did not always represent the same quantity from one place to another.

  • This diversity complicated trade, taxation, construction and scientific exchanges.

  • Authorities sometimes kept official physical standards to define the units used within their territory.

The Birth of the Metric System

  • The metric system was developed in France at the end of the 18th century.

  • Its creators wanted to replace the many local measures with a uniform and rational system.

  • The metre was originally defined according to the dimensions of the Earth.

  • It was intended to represent a precise fraction of the distance between the Equator and the North Pole.

  • The kilogram was linked to the mass of a specified volume of water.

  • The metric system was based on multiples and submultiples of ten.

  • This organization made conversions between units easier.

  • The system gradually spread to many countries before becoming the foundation of the International System of Units.

The International System of Units

  • The International System of Units was officially established in 1960.

  • It is identified by the abbreviation SI, derived from its French name.

  • The SI includes seven base units.

  • These units are used to define all the other units needed to measure physical phenomena.

  • The system is regularly refined by international scientific organizations.

  • Since 2019, the base units have been defined using fundamental constants of nature rather than physical objects.

  • This method provides standards that are more stable, reproducible and universal.

The Metre and Length

  • The metre is the SI base unit of length.

  • Its symbol is m.

  • It is now defined using the speed of light in a vacuum.

  • One kilometre equals 1,000 metres.

  • One centimetre equals one hundredth of a metre.

  • One millimetre equals one thousandth of a metre.

  • Length is used to measure distances, heights, widths, depths and dimensions.

  • Great astronomical distances may be expressed in astronomical units or light-years.

  • A light-year is a unit of distance, not a unit of time.

The Kilogram and Mass

  • The kilogram is the base unit of mass.

  • Its symbol is kg.

  • It is the only SI base unit whose name already contains a prefix.

  • One gram equals one thousandth of a kilogram.

  • One metric tonne equals 1,000 kilograms.

  • Mass represents the quantity of matter and an object’s resistance to a change in motion.

  • It should not be confused with weight.

  • Weight is a force produced by the gravitational attraction acting on a mass.

  • A person’s mass remains the same on Earth and on the Moon, but that person’s weight is different.

The Second and Time

  • The second is the base unit of time.

  • Its symbol is s.

  • It is defined using an extremely stable frequency associated with the cesium-133 atom.

  • One minute contains 60 seconds.

  • One hour contains 60 minutes, or 3,600 seconds.

  • An ordinary day contains 24 hours.

  • Unlike most metric units, the common units of time are not based entirely on multiples of ten.

  • Atomic clocks make it possible to measure time with extraordinary precision.

  • This precision is essential for telecommunications, satellite navigation and scientific research.

The Ampere and Electric Current

  • The ampere is the base unit of electric current.

  • Its symbol is A.

  • It measures the flow of electric charge through a conductor.

  • The unit is named after the French physicist André-Marie Ampère.

  • The volt measures electric potential difference.

  • The ohm measures electrical resistance.

  • The watt measures power, including electrical power.

  • An electrical device can therefore be described using several different quantities.

The Kelvin and Temperature

  • The kelvin is the base unit of thermodynamic temperature.

  • Its symbol is K.

  • It is written as 300 K, not 300 degrees kelvin.

  • The kelvin scale begins at absolute zero, which represents the lowest theoretically possible temperature.

  • Absolute zero corresponds to approximately −273.15 degrees Celsius.

  • A change of one kelvin is equal to a change of one degree Celsius.

  • The Celsius scale is commonly used in everyday life and in many scientific fields.

  • On the Celsius scale, water freezes at approximately 0 °C and boils at approximately 100 °C under standard atmospheric pressure.

  • The Fahrenheit scale remains widely used in the United States.

The Mole and Amount of Substance

  • The mole is the base unit for the amount of substance.

  • Its symbol is mol.

  • One mole contains a fixed number of elementary entities known as Avogadro’s number.

  • These entities may be atoms, molecules, ions or other particles.

  • The mole allows chemists to connect the microscopic world of particles with quantities that can be measured in a laboratory.

  • One mole of one substance does not necessarily have the same mass as one mole of another substance.

  • The mass depends on the type of atoms or molecules involved.

The Candela and Luminous Intensity

  • The candela is the base unit of luminous intensity.

  • Its symbol is cd.

  • It measures the light emitted by a source in a particular direction.

  • The lumen measures the total luminous flux produced by a source.

  • The lux measures the amount of light received on a surface.

  • These units are used to describe lamps, building lighting, screens and public installations.

  • A source may produce a great deal of light while illuminating a surface poorly if it is too far away or incorrectly directed.

Derived Units

  • Derived units are formed from the base units.

  • Speed is generally expressed in metres per second.

  • Acceleration is expressed in metres per second squared.

  • Area is measured in square metres.

  • Volume is measured in cubic metres.

  • The newton is the unit of force.

  • One newton is the force required to give a mass of one kilogram an acceleration of one metre per second squared.

  • The joule is the unit of energy and work.

  • The watt is the unit of power and is equal to one joule per second.

  • The pascal is the unit of pressure.

  • The hertz is the unit of frequency and corresponds to a phenomenon occurring once per second.

The Litre and Volume

  • The litre is a unit of volume accepted for use with the SI.

  • Its symbol is L.

  • One litre equals one cubic decimetre.

  • One millilitre equals one cubic centimetre.

  • The litre is commonly used to measure liquids, beverages, fuel and container capacity.

  • The cubic metre is more commonly used for large volumes, such as those of a room, a tank or water consumption.

  • Volume should not be confused with mass, even though the two may be related through density.

Metric Prefixes

  • Prefixes make it possible to express very large or very small quantities without writing long strings of zeros.

  • The prefix kilo means one thousand.

  • The prefix centi means one hundredth.

  • The prefix milli means one thousandth.

  • The prefix micro represents one millionth.

  • The prefix nano represents one billionth.

  • The prefix mega represents one million.

  • The prefix giga represents one billion.

  • One megawatt therefore equals one million watts.

  • One nanometre equals one billionth of a metre.

  • Prefixes must be used carefully because an error involving milli, micro or nano can create enormous differences.

Imperial and United States Customary Systems

  • Some countries still use units derived from the British imperial system or the United States customary system.

  • Length may be expressed in inches, feet, yards or miles.

  • Mass and weight are often expressed in ounces and pounds.

  • Volumes may be given in pints, quarts or gallons.

  • The United States gallon does not have the same value as the former imperial gallon.

  • Confusion between measurement systems can therefore cause major errors.

  • The United Kingdom officially uses the metric system, but some traditional units remain common.

  • Canada officially uses the metric system, although feet, inches and pounds remain common in several contexts.

Conversions

  • A conversion consists of expressing the same quantity in a different unit.

  • One metre equals 100 centimetres.

  • One kilometre equals 1,000 metres.

  • To convert kilometres into metres, the value must therefore be multiplied by 1,000.

  • Conversions within the metric system are generally straightforward because of its decimal organization.

  • Conversions between metric and imperial units often require more complex factors.

  • One inch is exactly equal to 2.54 centimetres.

  • A conversion error can have serious consequences in engineering, aviation, medicine or space navigation.

Precision and Accuracy

  • Accuracy indicates how close a measurement is to the true value.

  • Precision indicates how closely repeated measurements agree with one another.

  • An instrument may provide results that are very close to one another while being poorly calibrated.

  • It may therefore be precise without being accurate.

  • Every measurement includes some degree of uncertainty.

  • This uncertainty depends on the instrument, the method, the conditions and the person performing the measurement.

  • Giving too many digits may create a false impression of accuracy.

  • Significant figures make it possible to indicate the level of precision that is actually justified.

Measuring Instruments

  • A ruler or measuring tape is used to determine length.

  • A balance measures mass, while a dynamometer measures force.

  • A stopwatch measures duration.

  • A thermometer measures temperature.

  • A barometer measures atmospheric pressure.

  • An ammeter measures electric current.

  • A voltmeter measures electric potential difference.

  • Instruments must be calibrated so that their results correspond to a recognized reference.

  • Digital devices make readings easier, but they do not eliminate measurement errors.

Measurement in Everyday Life

  • Units are involved in almost every everyday activity.

  • Food is sold according to its mass, volume or quantity.

  • Road distances are indicated in kilometres and speeds in kilometres per hour.

  • Recipes use grams, millilitres, cups or spoonfuls.

  • Screen sizes are often given in inches, even in countries that use the metric system.

  • Electricity consumption is generally billed in kilowatt-hours.

  • Tire pressure, body temperature and medication dosages also depend on precise measurements.

The Importance of Common Standards

  • Standards ensure that the same kilogram, metre or second has the same meaning everywhere.

  • They allow parts manufactured in different countries to work together.

  • They ensure fairness in trade and the reliability of medical analyses.

  • They make comparisons between scientific experiments possible.

  • They also help monitor the climate, natural resources and industrial activities.

  • Metrology is the science of measurement.

  • It develops the references, methods and procedures needed to maintain confidence in measurement results.

  • Behind every ordinary measurement lies a vast international system of definitions, standards and controls.

Advertisement

Quiz questions preview

  • What unit of measurement of the ratio between two quantities is commonly used to quantify the noise level?

    Erg | Decibel | Farad | Sievert
  • To which number does the prefix "Nano" correspond in the International System of Units?

    One-Trillionth | One-Billionth | One-Millionth | One-Thousandth
  • To which number does the prefix "Pico" correspond in the International System of Units?

    One-Billionth | One-Millionth | One-Thousandth | One-Trillionth
  • What is the symbol for hertz?

    H | Htz | Hz | Ht
  • What is the unit of angle of the International System?

    Grade | Arc | Degree | Radian